[757labs] Updates!

[ethan at 757.org]

> It's a 6, but the spec says only two wire is needed, as it doesn't
> answer back, so one more for ground and we're good. Unless I read it
> wrong.
> - Jody

It's been a long while (I've still got lots of crimp on 6 conductor RJ 
ends and some 6 conductor silver satin even.) As I recall they put the 
needed pin on the edge or something, so you couldn't get away with a 4 pin 
cable.

Another thing is to pick up like 3 or 4 sets of magnetic switches for the 
doors and run the wires for those. I figure we can tie it back to the AMX, 
and then set a button as an "armed" mode, so if any of them is tripped the 
lab status goes to open, and lights are triggered on entry?


--
Ethan O'Toole
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Flickr photos    : http://www.flickr.com/photos/ethanotoole
Youtube videos   : www.youtube.com/user/telmnstr
Homepage         : users.757.org/~ethan
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-